- Blueprints for Success
- Training for Figure and Fitness
- Training Programs for Mass and Power
- Training Programs for Maximum Muscular Development
- Intermediate Training Program #1 (Complete Development of All Muscle Groups)
- Intermediate Training Program #2 (Muscle Size Building)
- Intermediate Training Program #3 (Back to the Basics for Maximum Muscle Size)
- Intermediate Training Program #4 (Continuous Quality Improvement for the Natural Athlete)
- Contest Training Programs
- Specific Bodypart Training
By Steve Colescott, Metabolic Specialist
THE IMPORTANCE OF BICEPS
In bodybuilding, biceps are, without a doubt, the favorite bodypart for most of us to train. They tend to respond well to training for 90% of us, due to their strong neural pathways and above average blood supply, which almost guarantee muscle pumps. “A champion bodybuilder should display balanced development of the entire musculature, biceps included,” says NPC Kentucky class winner Steve Weingarten. “And there are very few poses that aren't enhanced by a pair of billowing, peaked biceps!” The wow factor of big, shapely arms cannot be overlooked, whether on the beach, on the bodybuilding stage or straining under a well-tailored suit.
According to Ray Binkowski, multiple bodybuilding class title holder, “Take the front and rear double bicep poses. Overly developed biceps will overshadow the anterior delts. Underdeveloped biceps will be overshadowed by the anterior delts. Properly developed biceps are important on stage because they balance a competitor’s physique.”
For men, arms have always been a marker of masculinity. In part, because they are displayed nine months out of the year (during short-sleeve weather) and are often the first muscles in which we notice growth during puberty (either in ourselves or in our more genetically-gifted classmates). In women, shapely muscular arms have recently come in vogue. Hollywood starlets Linda Hamilton and Angela Basset sported gun-emphasizing tanktops and impressed audiences with their lean, strong looking arms. The new physical female ideal is not just lean, but possesses a body, and in particular, arms with muscularity and definition.
ANATOMY AND FUNCTION
An understanding of the structures and actions of the muscles of the upper arm are important when designing your biceps training program. When we speak of the biceps we generally mean more than just the biceps brachii. Because they tend to work together, the biceps group also includes the brachialis, brachioradialis and pronator teres muscles. The major bone of the upper arm is the humerus (which gives us the term funny bone). There are two bones in the forearm, the radius (the shorter bone on the “pinky side” of your forearm) and the ulna (the main stabilizing bone of the forearm on the “thumb side”). The tendons that attach muscles are referred to as the origin (the tendon closest to spine) and an insertion (the tendon of attachment furthest down the arm).
As its name suggests, the biceps is a two-headed muscle which crosses both the elbow and shoulder joints. Both heads share a common insertion on the tuberosity of the radius (you can feel this thick tendon just beneath the skin on the inside of your elbow). The lateral (“outer” or long) head originates on your shoulder blade (on the supraglenoid tubercle, above the glenoid fossa) and the tendon crosses inside the head of the humerus to emerge at the upper arm. The medial (short or “inner”) biceps head originates on the coracoid process of the scapula (upper shoulder blade) and the upper lip of the glenoid fossa (the cartilage-lined depression of bone that the humerus is placed in the shoulder joint). If your arms are well-developed and you possess low bodyfat levels, you will be able to see the split between the two heads of the biceps. A peaked shape to the biceps comes from placement of the tendons of the two biceps heads.
The brachioradialis inserts on the other bone in the forearm on the “thumb side” (the lateral surface of the distal radius, at the styloid process), partway between the elbow and wrist) and originates low on the upper arm bone, near the outer elbow (the distal section of the lateral condyloid ridge of the humerus). The coracobrachialis lies under the biceps but, since it does not cross the elbow joint (it assists the shoulder and back muscles with rowing-type movements), it is not considered part of the biceps (elbow flexor) group.
The muscles of the arms have a unique function in sports movement. While the big muscles of the body (hip flexors, quadriceps, hamstrings, pecs, lats, rhomboids, traps, spinal erectors) drive powerful action, the muscles of the arm (biceps, triceps and forearms) transfer that force into your opponent, the ball or the bat, racquet, club or instrument of your particular sport.
Biceps derive a great deal of stimulation from their use as a secondary mover. They overlap with pulling exercises, such as chins, pulldowns, lat rows and upright rows. How much emphasis depends on muscle insertions, exercise form and neural excitatory thresholds. Because your biceps derive a fair amount of work during your back training, minimal direct training may be needed. The biceps generally provide lifters with a high level of neural activation (few have trouble “feeling” their arms) and a low level of inroads into recovery ability, which lends themselves well to arm specialization phases.
MUSCLE SHAPING
Is muscle shaping possible? This is one of the most controversial topics in bodybuilding. The consensus is split, often based on background. Those with a pure in-the-gym trenches background, particularly the old-timers, firmly believe that muscle shaping is a reality. Those enlightened with collegiate degrees in exercise physiology feel certain that muscle shaping is an ancient gym myth; as archaic as kelp tablets and brewer’s yeast. These experts assert that muscle isolation is impossible and muscle fibers contract in an as-needed basis throughout the full length of the functional muscle group.
So, which group is right? Both are partially correct. The scholarly set has valid points. Muscle fibers do contract on an all-or-none basis along their length. Isolation of a particular section of a muscle (lower biceps, for instance) is impossible in a real-life setting. Muscles have an origin point (the attachment closest to the center of the body), belly (central mass of the muscle) and insertion (tendon attachment furthest from the center of the body). When we increase muscle size, we cause growth in fibers along the full length of the muscle, not in a particular section (such as upper biceps, peak or lower biceps).
For example, Preacher (Scott) Curls were commonly prescribed to lengthen biceps, as they were believed to work the lower biceps. Feeling emphasis (stretch) in a particular area does not necessarily mean that area of a muscle group is being worked more than others. We cannot affect muscle length, the origin and insertion points are genetically preset. Nothing short of surgery can change them. If you have “high biceps” like 80s pros Albert Beckles or Franco Columbo, you can build up the muscles of the forearm and brachialis, therefore filling in your gap. Those not possessing full, football-shaped biceps (like Sergio Oliva) tend to have impressive biceps peaks (again Albert Beckles comes to mind). This example serves as a reminder to appreciate what you have and make the best of it.
While it is true that we cannot isolate specific parts of a muscle, we can often place greater emphasize on part of a muscle group through our choice in exercise, grip, range-of-motion, or body position. Lifting with a wide grip (elbows in, your grip wider than your shoulders), places greater emphasis on the medial (inner) biceps. This can be done with Barbell Curls, Scott Curls or Cable Curls simply be choosing proper hand spacing and elbow placement. It can also be done by replicating that same arc of movement with dumbbells or cables. Incline Dumbbell Curls in which the ‘bells are curled outward shift the emphasis more prominently on the inner biceps head.
Conversely, close-grip curling movements shift emphasis to the lateral (outer) biceps. Two-handed Cable Curls from the low pulley and Scott Curls with the elbows placed wide are good exercises to shift emphasis to the outer biceps head. Also, Alternating Dumbbell Curls in which the weights are curled across and in front of the body place a noticeable emphasis on the outer biceps. The traditional Concentration Curl, in which the lifter is seated with his working arms rested along the inside of his knee, also works this area.
Linda Reho mixes her background as an exercise physiologist with her experience as a multiple figure competition winner in her approach to exercise selection. “Some days I use a very close-grip, gluing my elbows tightly to my sides to ensure I’m strictly using my biceps muscles. On other days I change to a wider grip. I believe this hits different muscle fibers, training different aspects of the biceps muscles.”
Adjustments to elbows and grip position not only allow you to shift greater emphasis towards one of the biceps heads, but also adds variety to your training. Extreme, awkward angles however can increase strain on the soft tissues of the shoulder, elbow and wrist. For this reason, use these angles periodically for some of your exercises and never if the exercises cause pain or discomfort in the joints. Intelligently applied, these adjustments can lead to better arm development and less strain from repeated overuse of a single movement pattern.
In addition to grip width and elbow placement, the hand position can shift muscular emphasis. The primary grip positions we have in biceps training are: 1) Supinated or palms-up such as in a curl with a straight barbell, 2) Neutral or palms-facing such as in a hammer curl, or 3) Pronated or palms-down such as in a Reverse Curl. The brachialis is highly activated when you curl with a neutral thumb’s-up grip, such as with DB Hammer Curls. The pronator teres receives greater emphasis when you use a palms-down grip, such as with Reverse Curls.
Of course, these are not the only grips we use. When curling with a cambered (E-Z curl) bar, are hands are in a position halfway between supinated and neutral, just as reverse curls with a cambered bar places our hands halfway between a neutral and pronated grip. Dumbbell Curls allow us to supinate [outwardly rotate the thumb] as we curls so the grip changes throughout the completion of the rep. We do not isolate any of these muscles in an exercise but a general understanding of the biomechanics will help guide you in your exercise selection. Perhaps the views of Brad Steere (WNBF Pro and Northern Kentucky class winner) on muscle shaping say it best: “Hit 'em hard, make 'em grow, and don't worry about the shape, it will look just fine if it is big enough!”
INTENSIFICATION TECHNIQUES
Utilizing specialized training techniques to increase biceps stimulation tends to be remarkably effective. The biceps group is relatively small, with an excellent blood supply and neural activity. As such, giving them an extra jolt of punishment can push past barriers without making huge inroads into the body’s overall systemic recovery. Still, use these sparingly. A little bit goes a long way.
Partials. Partial Reps create a very different feel (neurological effect) from traditional full reps, which creates an effective growth-promoting stimulus. They can be incorporated in your program in a number of ways. If your primary goal is biceps strength, partial reps in the Barbell Curl can be performed in a power rack with the pins set at the weak point in the range of motion (almost always the point in the rep where your forearms are parallel to the ground). Set the pins in the rack for a 3-4” range of motion and do 4-6 sets of 3-4 reps for no more then six workouts. You should notice a solid strength gain when you go back to full reps.
Another form of partials that is especially adaptable to biceps (and Barbell Curls) is Twenty-Ones. Twenty-Ones involve the use of half-reps. Seven reps are done from the top position to midpoint (forearms parallel to the ground); seven are done from the bottom position to midpoint; and a final seven are done full-range. You can do this technique best with Barbell Curls and Standing Dumbbell Curls. Linda Reho occasionally uses Twenty-Ones regularly to shock her biceps. “Three different ranges of motion, allow for concentration on different angles, thus different muscle fibers of the biceps, and are a great shocker to your bicep routine.” I recommend just two to four sets at the conclusion of your biceps workout due to the high reps.
The final form of partials is One-and-a-Halves. As the name suggests, these involve performing a full-range rep followed by a half-rep from the top to midpoint (which you count as a single repetition). Do One-and-a-Halves for 3-5 sets of 6-8 reps (which, since you are doing counting the one-and-a-half reps as just one rep, will be like doing 9-12 reps) on your final biceps exercise. Reversing the momentum of the weight at the midpoint creates unique neural stimuli that can jumpstart your gains and provides some variety in your training.
While One-and-a-Halves, Twenty-Ones and Partials call for you to change direction mid-rep, in Static Contractions you stop the rep midway in the range-of-motion and “squeeze the muscle” without moving the weight. I recommend pausing at three points of the range of motion, one-quarter of the way down, midway, and three-quarters of the way down for a 30-45 seconds squeeze with the bar not noticeably moving. This works best for two-handed exercises (Barbell Curls, Reverse Curls, Machine Curls) because it is difficult to pause at the same point with dumbbell exercises. Static Contractions should be incorporated for just one or two sets of 6-10 reps of a single exercise.
Studies show that the eccentric portion of a rep (lowering the weight from a contracted position) is responsible for most of our muscle growth. This makes Accentuated Eccentrics something you should try. This can be done in a number of ways: 1) Slow Negatives can be used for nearly any biceps exercise and work very well with Cheating and Forced Reps. Since we can lower heavier weights than we can lift, the heavier weights used for these techniques are further enhanced by slowly fighting the eccentric portion of the lift. 2) Increased Negatives require that you have a training partner to manually apply added resistance to the bar or dumbbells as you lower the weight. This technique should be used sparingly (perhaps for just one or two sets of an exercise as a plateau buster). 3) Negative-Only Reps are difficult to safely do for most curling exercises because they would require two spotters to lift the weight to the top position so that the lifter could slowly lower it. It can be done to great effect with a Undergrip Chin-up, since the lifter can jump (or use a step to lift themselves) to the top position and then slowly lower their body (taking 30-45 seconds to reach full extension of the arms). This is best when used as a finishing exercise for a single set of 6-10 reps.
The following intensifiers are set extension techniques, which allow you to continue a set beyond the point in which you would typically be unable to continue (the added contractions recruiting more muscle fibers).
Cheating. This is probably the most commonly used technique on this list and also the most widely abused. Proper use of cheating involves subtle movement in other joints to create momentum, allowing the weight to move past the sticking point after the lifter has done as many strict reps as possible. In biceps training, this usually means a slight unlocking of the knees and forward hip thrust to begin the curling movement with added momentum. The key here is to only use cheating minimally. Cheating can be used in two ways, beginners should stick to getting just 2-3 extra reps at the completion of their last two heavy sets of a basic exercise (Barbell Curls, Dumbell Curls, Hammer Curls or Reverse Curls). Don’t use this technique on machines or Preacher Curls. Intermediate (4 or more months of consistent training) or advanced lifters (a year of consistent training) can do Cheat Curls as a specific exercise, allowing for heavier weights than they would normally be able to use. If done in this manner, begin with one or two lighter non-cheat warm-up sets and then do three to five sets of four to eight reps. With either style, you should make sure to lower the weight slowly and in control (to take advantage of the eccentric contraction with a heavy weight). An experienced eye can pick out a veteran from a novice by their ability to apply just the necessary amount of assistance to cause more punishment to the biceps rather than making the set easier. This can also be said for the next technique.
Forced Reps. If you have a good training partner, they can assist you in pushing a set beyond failure by gently assisting you by applying just a few pounds worth of pressure on the bar (or dumbbells) through the sticking point. Like Cheat Reps, have your partner assist you through just two to three extra reps at the end of your last two sets.
Rest Pause is another form of intensification that simply manipulates rest periods to allow more work to be performed without requiring a training partner or loss of strict form. For biceps training, Rest Pause can be done for the basic movements (particularly Standing Barbell or Dumbbell Curls). After warming-up, choose a weight that can be done in strict form for 5-6 reps. Once you reach failure, set the weight down for just two or three deep breaths and then try for two to three more reps. Advanced lifters can attempt a second “breather” which should allow for another one to three difficult reps. This should be done for just one to three sets on a single biceps exercise per workout. Rest Pause is best used as a strength move, with the additional rest periods allowing for more forceful contractions.
If you are looking for a lactic acid-inducing, insane pump-causing technique, I would recommend Drop-Sets (also known as the “down the rack”). While the Rest Pause technique uses a 20 to 30-second rest before returning to more reps with the same weight, Drop Sets incorporate almost no rest with a lighter weight. Let’s say you normally do Dumbbell Curls with 45-pounders for around 8 reps… Start with that weight, once you reach failure, set the weight down on the rack and immediately pick up a pair of 35-pounders. Get as many reps as possible (probably around 3-5reps). Beginners should do just a single drop. Intermediates can do a second drop (in this example, 25-pounders for another 3-5 reps). Advanced lifters can do a third drop and you will be amazed how heavy 15 to 20-pounders will feel at this point. My personal twist on Drop Sets is the Band Jettison Technique, modeled after a similar technique used by writer Dennis Weis on Upright Rows. Basically, I perform Barbell or Dumbbell Curls while also holding elastic tubing or power bands to increase resistance. After reaching failure, I step back so that I no longer am anchoring the elastic band or tube (at the bottom of the rep to keep from getting whipped in the face),and then continue on with as many reps with just the metal weight.
The final technique that I use with my training clients for variety is Timed Sets. This is an excellent finisher to a biceps workout (since you won’t have much left once you have done a set of these). I typically have them curl with dumbbells for 60 seconds, which seems like an eternity. We follow a fast pace but don’t count the reps. I count off the time at major intervals and often will have them do twenty seconds curling both ‘bells together, the next twenty seconds alternating, and the final twenty curling together. Talk about lactic acid build-up!
There are a variety of supersets that can enhance the training effect. The idea here is to increase work density (more work performed in less time). In biceps training, there are four styles of supersets that are particularly applicable: 1) Pre-exhaust Supersets. By doing an isolation exercise (pretty much any curl), followed immediately by a compound exercise (such as Undergrip Chins) more reps can be performed after the biceps are fatigued. 2) Antagonist Supersets. There are two benefits to supersetting exercises for opposing muscle groups (such as biceps and triceps): first, more work is done in less time and second, muscle groups recuperate faster when their opposing group is worked. 3) Trisets/ Giant Sets should be done with three movements that vary in feel or emphasis such as Incline Dumbbell Curls (elbows behind the body), Standing Barbell Curls (elbows near the sides) and Overhead Cable Curls (elbows lifted high) or exercises utilizing wide, moderate and narrow grips. You can also break up two biceps exercises with a triceps exercise, for the reasons explained earlier.
BODYPART SPLITS
How should we fit biceps into your weekly training routine? The four best splits include:
- Push/Pull Split. Following your back training with biceps has the advantage that you require less warm-up sets since biceps have functioned as secondary movers in chin-up, pulldown and rowing exercises. This works best for beginner and intermediate lifters or advanced lifters in phases in which they are following abbreviated routines.
- Inverse Push/Pull. By flip-flopping things so that you follow chest training with biceps, you go into biceps training fresh. This is an excellent option if you find that back training is impeding upon your biceps strength.
- Arms Alone. In recent years, more and more advanced lifters have done to once-a-week splits in which a single day’s training is devoted to one major body part. Because increased volume is required to stimulate growth, an arm training (biceps and triceps) day allows for higher volume (14+sets). Personally, I recommend training more often. Instead of training biceps once a week for 16 sets, I’d rather train twice weekly for nine to twelve sets. This allows for more growth opportunities and better recuperation (see the next section).
- Specialization Training. Specialization training requires increase training frequency. Read the Specialization section in the next section for more details.
PROGRAMMING BICEPS PROGRAMS
Okay, with all that info you have to be asking yourself, “How do I fit it all together?” Biceps training is not incredibly complex. Now that you know the anatomy, physiology and assorted details behind biceps training, the rationale behind the following programs will make sense and (more importantly) you will understand how to adapt them to your personal needs.
Teacher and champion bodybuilder James Dalton uses a wide range of reps to build his impressive biceps. “The rep ranges that work best for me are 6-12 reps. This is the rep range that best stimulates the fast-twitch fibers which provide the most muscle growth. Using too low of a rep range (4 or less), can increases the risk of injury and not provide enough time under tension to stimulate the biceps. Using too high of a rep range (more than 15 reps), may not adequately activate/stimulate the fast twitch muscle fibers most prone to hypertrophy. However, I do believe it is good to OCCASIONALLY use a low rep range for power and high rep range for pump and hitting the slow-twitch fibers.” This advice matches the training strategies of the world’s best physique champions.
Although powerlifters are known for performing low-rep singles, doubles and triples, champion lifter Wade Johnson believes in sets of up to twenty reps with light weights for recuperation and building grip.
Look at the following training templates as guidelines:
BEGINNERS
We want to begin the biceps workout with a basic strength exercise like Barbell Curls or Alternate Dumbbell Curls. At this stage in your development, we need general size and strength gains so medium-width grips and arcs of motion are all you need. Exercise physiologist and figure champion Linda Reho advises, “Never sacrifice perfect form for another rep with weight that you cannot handle. Also, always mentally think of the muscle you are training, and then physically squeeze the particular muscle group, with each and every exercise that you execute.” Strength gains happen fastest for beginners, so don’t sacrifice strict form and a slow, controlled negative. The poundages will climb and you will know they were brought on by honest biceps enhancement. The second exercise focuses on the brachialis/ brachioradialis. We will be alternating the two listed exercises each workout. Here’s an example:
- Alternate Dumbbell Curl
Warm-up
3-4 sets of 6-10 reps - Dumbbell Hammer Curl or Reverse Curl
2-3 sets of 8-12 reps
Heavy Squats, Deadlifts, Rows and Presses and plenty of good, nutritious food will do more for busting your biceps size plateau than thousands of heavy curls and dozens of hours of triceps work. At this stage the best thing you can do to increase arm size is to get bigger and stronger overall. “I really feel that the majority of my arm growth has actually come from heavy rowing for my back coupled with arm work after,” says Brad Steere.
It is well-known that increases in bodyweight are also a necessary part of arm growth. Despite our best efforts to circumvent nature, the body’s growth mechanisms are programmed to maintain a certain amount of symmetrical growth. In order to put an inch on your biceps measurement the body requires a bodyweight gain of about fifteen pounds. Once you have decent-sized arms (15-18”) this number is closer to twenty pounds for each added inch. The rare genetic elite among us in the freaky (18-22” arm range) need to add closer to twenty-five to thirty lean pounds for each inch of shirt-stretching size they pack on, since more actually mass is required to increase the measurement as the circumference increases (ask your high school algebra teacher to explain).
INTERMEDIATES
Don’t let the “newbies” from the Beginners group read this section. Read it over three or four times, commit it to memory, and then get out your black Sharpie marker and “reverse highlight” it out of existence before your kid brother (or sister) reads the section.
We told the beginners to keep it strict. In this section we are going to apparently contradict that advice. As an Intermediate level lifter, we are going to start including Cheating and Slow Eccentrics in the last couple sets of our first biceps exercise, which should be a basic strength movement like Barbell Curls or Alternate Dumbbell Curls. You have to have fully mastered strict form to understand properly cheating on a set of curls. Do one to two strict sets (even after your warm-ups) before including cheating sets. Remember: minimal cheating to make the exercise more difficult. Your biceps don’t know how much weight you have loaded up, just how much force they must exert to perform the tasks that you call upon them.
Since you are now able to handle higher training volume, we include a second biceps exercise. This time we increase the rep range slightly and choose a more specialized exercise, targeting a specific bicep emphasis (range of motion, feel or arc-of-movement). Excellent choices here might include Incline Dumbbell Curls, Drag Curls, Scott Curls, any of the various Cable Curls or pretty much any of the exercises listed here that you want to try. I recommend that you switch this exercise often to keep the workouts interesting and your biceps development complete.
- Barbell Curl
Warm-up
4 sets of 6-10 reps - Incline Dumbbell Curls
3 sets of 8-12 reps - Hammer Curl, Zottman Curl, Reverse Curl (choose 1)
2-3 sets of 8-12 reps
As an intermediate, I recommend that you also include forearm work as this will help with the development and strength increases in the biceps group. Your last exercise also serves as a great warm-up for direct forearm exercises like Wrist Curls.
VARIED ARM POSITION ROUTINE
- Barbell Drag Curl
Warm-up
4 sets of 6-10 reps - Spider Bench Curl (or Preacher Curl on the flat-side of bench)
3-4 sets of 8-12 reps - Overhead Cable Curl (from high cable, curling over forehead to base of skull)
3 sets of 10-15 reps - Dumbbell Hammer Curl
3 sets of 8-12 reps
To create natural variety in the workout, choose exercises that work various positions of the upper arm in relations to the spine. The normal position of the biceps in relation to the spine while training biceps ranges from roughly parallel (Hammer Dumbbell Curls) to just short of perpendicular (Scott Curls). Exercises like Drag Curls, Supine Curls and Incline Dumbbell Curls begin with the biceps in a stretched position. Exercises like Overhead Cable Curls (one- or two-handed) work the biceps beginning from a position closer to contracted. There is no special magic to this routine but the eclectic movements may provide new growth stimulus.
ANTAGONIST SUPERSET ROUTINE
- Dumbbell Curl
Warm-up
4 sets of 6-10 reps supersetted with… - A2. Lying Dumbbell Triceps Extensions
Warm-up
4 sets of 6-10 reps - Low-Cable Curls
3 sets of 8-12 reps supersetted with… - Triceps Pushdowns
3 sets of 8-12 reps - Undergrip Chin
3 sets of 10-15 reps supersetted with… - Close-grip Bench
3 sets of 10-15 reps - Reverse Preacher Curl
3 sets of 8-12 reps
We have discussed previously the recuperative benefits of supersetting antagonist body parts. Training biceps and triceps together also has the benefit of providing a wicked muscle pump. In this example, we begin with two basic strength-builders. We are not alternating our Dumbbell Curls since we are employing supersets with the goal of exhausting muscle fibers fast (less of a strength-building emphasis than usual). The triceps exercises are chosen to make use of some of the same equipment (so you are not annoying other gym members by tying up a few different pieces of equipment at once). The final exercise (Reverse Scott Curl) is not supersetted, although it could be, if you had wished. Use the techniques when they serve you but DON’T arrange the program just to follow a previous pattern.
BICEPS GIANT-SET ROUTINE
- Incline Dumbbell Curls
Warm-up
3 sets of 6-10 - Dumbbell Preacher Curls
3 sets of 8-12 supersetted with… - Undergrip Chins
3 sets of 8-12 reps supersetted with… - Dumbbell Hammer Curls
3 sets of 8-12 reps
There is something to be said for hitting a body part hard and fast from a variety of angles. Biceps seem to thrive on this. In this example, we begin with straight sets of Incline Dumbbell Curls since we do not want the short rest periods of supersets to limit the heavy weight used on our bread-and-butter strength move. After completing three sets on the Incline, we obliterate what fibers are left with a three exercise superset. The strictness of Scott Curl acts as a great pre-exhaust exercise for Undergrip Chins. The fresh muscles in our back (lats, rhomboids, delts) help us eek out more from our fatigued biceps. Dumbbell Hammer Curls finish off the biceps group by directing emphasis towards the brachialis. Notice that our overall number of sets is decreased to offset the short rest periods employed.
SPECIALIZATION
If you have read my “Double Whammy” article about body part specialization, you know that I am a huge proponent of more frequent training for weak points. To do this, I recommend a high-volume workout followed two days later by a brief but intense “feeder” workout. The Double Whammy protocol increases arm training frequency even further since it recommends arranging your schedule to a five-day (as opposed to a week-long) rotation. When specializing for biceps, I recommend you train biceps and triceps together, as an overall arm specialization program will be far more effective. Read the article on the Beverly website for more details (www.bodymusclejournal.com/vol10/whammy.html).
While proper bodybuilding nutrition is always important, it is especially important when in a bodypart specialization phase. Top nutrition gurus of the sixties like Rheo H. Blair, Jim Heflin and Vince Gironda recommended repeated feedings of liver and amino acid tablets throughout the day for increases in arm size. For best results, add 3-4 Ultra 40 Desiccated Liver and 3-4 Density Amino Acids throughout the day in4-5 doses to provide a constant feeding of quality amino acids. To take it a step further, I recommend an aggressive peri-workout glycogen and amino acid feeding protocol on your arm training days. Take 10-15 Muscularity BCAA capsules and sip Glutamine Select (2-3 scoops in water) during your workout. To top things off, drink a Muscle Provider/Mass Maker shake as soon as you get home from the gym. If you are following a reduced-carb diet, time you higher-carb days for the days you do your arm specialization program.
Primary Workout
- Incline Dumbbell Curl
Warm-up
6 sets of 6-10 - Wide-grip Barbell Drag Curl:
2-3 sets of 8-12 - Under-grip Chin
2 sets of max reps
“Feeder” Workout (2 days later):
- Seated Dumbbell Curl
Warm-up
1 set of 10-15 reps.
2 sets of 6-10/3-4/1-3 reps*
* in drop set style
The second workout not only provides a second hypertrophy-promoting stimulus but it also flushes the biceps with blood and nutrients increasing recuperation and growth. If you are following the amino-rich nutrition protocol above, you will be flooding your muscles with everything they need.
EXERCISES
If I had to choose just one biceps exercise, I would go with the extremely versatile Dumbbell Curl. The free movement of dumbbells allows for different elbow and hand positions, arcs of movement and ranges-of-motion to provide dozens of distinct variations.
The Incline Dumbbell Curl is a great size builder that places a lot of emphasis on the outer biceps. Set the bench at a 45° angle; focus on supinating the forearm (palms facing one another at the bottom, pinkie side of the dumbbell twisted inward towards your shoulder at the top) and slowly lowering the weight. Be cautious with your form on this exercise because, although it can pay big dividends in size, it also places stress on the shoulder and elbow joints.
Barbell Curls share a reputation with the two previous exercises as excellent strength and size builders. This exercise can be done with a straight or cambered bar and with various width grips. Become a technician on this exercise.
Unbalanced curls are a very effective method to shock your biceps into new growth. Charles Poliquin is a big advocate of the One-arm Barbell Curl. This exercise is done by grabbing an Olympic bar in the center and curling while balancing the bar. Ray Binkowski echoes Poliquin’s sentiments, “It is a great bicep exercise but also forces the lifter to work their core.” A regular 7-foot 45-pound Olympic bar is pretty hard to use at first so some may need to start with a short 5-foot bar (usually around 35-pounds). These can be done either standing or on a Scott Curl bench. Another unbalanced curl is the Kettlebell/Band Resistance Barbell Curl. This one was taught to me by powerlifting coach Louie Simmons and is used regularly by his team at Westside Barbell. Instead of loading a bar with traditional plates, he has them attach light kettlebells to the bar with bands (hanging about a foot below the bar). This makes for resistance that “squirms” as you try to curl it. Louie seemed to delight in the fact that I thought the bar with 25-pound kettlebells would be easy. It isn’t. Give this one a try.
The Imbalanced Dumbbell Curl is an exercise with an off-center load, either by loading an adjustable dumbbell with more weight on the pinkie side or gripping the handle so that the center of the handle is closer to that side. This creates more tension during the supination aspect of the curl.
The Preacher (or Scott) Curl supports the elbows, removing the ability to easily cheat or use body English to complete the reps. My preference is for benches with the rounded face, like the Body Masters unit, as they cause the elbow to raise as the while staying in contact with the bench, giving you a stronger contraction. Lower the weight slowly and never bounce at the bottom.
If your gym has a special Spider Bench (Nebula makes a great one) try the Spider Bench Curl, it braces the arms similar to the Preacher Curl but in a position closer to contraction. You can also duplicate the movement in the same manner that Steve Weingarten does. “I use the flat (90°) side of the preacher bench.” He finds great benefit from the Flat-faced Preacher Curl. “Using the pad at 45°, like most people do, causes the barbell to fall into you just after the halfway mark of the lift. There's no resistance from the halfway point up.”
The Dumbbell Concentration Curl works the lateral biceps head, since the weight is curled inward towards the midline of the body. It is a controlled, slow movement that makes a good “finishing” exercise.
A similar, but often under-utilized exercise is the Bent-over Barbell (Concentration) Curl. Done either standing or seated at the end of a bench, the weight should be curled up to the forehead and held for a pause in the contracted position. Because the elbows are raised to a position perpendicular to the spine (as in the Spider Bench Curl), you feel an exaggerated bicep contraction.
In contrast, the Barbell Drag Curl places the arm in an enhanced stretch position with your elbows behind the upper body, removing the front delt from the movement. Keeping the elbows back and the bar in contact with the body through the entirety of the exercise. James Dalton (multiple title winner in drug-tested and open contests) says, “Drag curls allow me to accentuate the negative (eccentric) part of the rep and really cut down on the exercise's momentum.”
Along with Incline Dumbbell Curls and Drag Curls, the Supine DB Curl also places the arm in a stretched position (at the shoulder joint). These are similar to the Incline Dumbbell Curl but are done lying on a flat bench. Because of the strain on the shoulder joint, use this occasionally for variety and go for feel over poundages.
As biceps exercises go, the Undergrip Chin provides a full range-of-motion with significant resistance throughout. Do it with a close grip and don’t be afraid to add weight once your strength allows. Undergrip Chins work well with a variety of intensification techniques: negative-only reps, drop-sets (removing added weight by squirming out of a dipping belt), static contraction pauses, forced reps and super-sets.
Cables allow us to direct the line of resistance in any direction we wish, making them particularly useful in biceps training. The standard is Standing Low Cable Curl but the Overhead Cable Curl (one or two-handed) allows for an excellent peak contraction effect. The Seated Cable Curl is a great finishing exercise. Sit on the floor in front of a low pulley. While resting your elbows on the inside of your knees, curl the weight either to your forehead or lower your head and take it near the base of your skull.
When doing the Zottman Curl, curl the dumbbell in front of the body emphasizing the supination by twisting your pinkie-side inward at the top and pronating on the way down.
Reverse Curls (curls performed with the palms facing downward) and Hammer Curls (curls performed with the palms facing one another) shift more of the workload to the brachialis and brachioradialis. Powerlifting champion Wade Johnson uses Hammer and Reverse Curls as assistance exercises in order to balance the biceps work he gets from all of the pulling and rowing he does in his bench press assistance and deadlift training.
Not many biceps machines have a good feel to them, but if your gym has one you like, Machine Curls are a great place) to do techniques like drop-sets or static contraction pauses. If your biceps doesn’t quite fit you, it may still work well for Reverse Curls or One-Arm Curls.
Well there you have it! If you’ve been involved in bodybuilding for any length of time, you have probably read dozens of biceps training articles. Hopefully this article takes you beyond copying someone’s biceps workout to being able to understand how to create one specifically tailored to your physique. Keep pumping!
VARIED ARM POSITION ROUTINE
- Barbell Drag Curl
Warm-up
4 sets of 6-10 reps - Spider Bench Curl (or Preacher Curl on the flat-side of bench)
3-4 sets of 8-12 reps - Overhead Cable Curl (from high cable, curling over forehead to base of skull)
3 sets of 10-15 reps - Dumbbell Hammer Curl
3 sets of 8-12 reps
To create natural variety in the workout, choose exercises that work various positions of the upper arm in relations to the spine. The normal position of the biceps in relation to the spine while training biceps ranges from roughly parallel (Hammer Dumbbell Curls) to just short of perpendicular (Scott Curls). Exercises like Drag Curls, Supine Curls and Incline Dumbbell Curls begin with the biceps in a stretched position. Exercises like Overhead Cable Curls (one- or two-handed) work the biceps beginning from a position closer to contracted. There is no special magic to this routine but the eclectic movements may provide new growth stimulus.
ANTAGONIST SUPERSET ROUTINE
- Dumbbell Curl
Warm-up
4 sets of 6-10 reps supersetted with… - A2. Lying Dumbbell Triceps Extensions
Warm-up
4 sets of 6-10 reps - B1. Low-Cable Curls
3 sets of 8-12 reps supersetted with… - B2. Triceps Pushdowns
3 sets of 8-12 reps - C1. Undergrip Chin
3 sets of 10-15 reps supersetted with… - C2. Close-grip Bench
3 sets of 10-15 reps - Reverse Preacher Curl
3 sets of 8-12 reps
We have discussed previously the recuperative benefits of supersetting antagonist body parts. Training biceps and triceps together also has the benefit of providing a wicked muscle pump. In this example, we begin with two basic strength-builders. We are not alternating our Dumbbell Curls since we are employing supersets with the goal of exhausting muscle fibers fast (less of a strength-building emphasis than usual). The triceps exercises are chosen to make use of some of the same equipment (so you are not annoying other gym members by tying up a few different pieces of equipment at once). The final exercise (Reverse Scott Curl) is not supersetted, although it could be, if you had wished. Use the techniques when they serve you but DON’T arrange the program just to follow a previous pattern.
BICEPS GIANT-SET ROUTINE
- Incline Dumbbell Curls
Warm-up
3 sets of 6-10 - Dumbbell Preacher Curls
3 sets of 8-12 supersetted with… - Undergrip Chins
3 sets of 8-12 reps supersetted with… - Dumbbell Hammer Curls
3 sets of 8-12 reps
There is something to be said for hitting a body part hard and fast from a variety of angles. Biceps seem to thrive on this. In this example, we begin with straight sets of Incline Dumbbell Curls since we do not want the short rest periods of supersets to limit the heavy weight used on our bread-and-butter strength move. After completing three sets on the Incline, we obliterate what fibers are left with a three exercise superset. The strictness of Scott Curl acts as a great pre-exhaust exercise for Undergrip Chins. The fresh muscles in our back (lats, rhomboids, delts) help us eek out more from our fatigued biceps. Dumbbell Hammer Curls finish off the biceps group by directing emphasis towards the brachialis. Notice that our overall number of sets is decreased to offset the short rest periods employed.
SPECIALIZATION
If you have read my “Double Whammy” article about body part specialization, you know that I am a huge proponent of more frequent training for weak points. To do this, I recommend a high-volume workout followed two days later by a brief but intense “feeder” workout. The Double Whammy protocol increases arm training frequency even further since it recommends arranging your schedule to a five-day (as opposed to a week-long) rotation. When specializing for biceps, I recommend you train biceps and triceps together, as an overall arm specialization program will be far more effective. Read the article on the Beverly website for more details (www.bodymusclejournal.com/vol10/whammy.html).
While proper bodybuilding nutrition is always important, it is especially important when in a bodypart specialization phase. Top nutrition gurus of the sixties like Rheo H. Blair, Jim Heflin and Vince Gironda recommended repeated feedings of liver and amino acid tablets throughout the day for increases in arm size. For best results, add 3-4 Ultra 40 Desiccated Liver and 3-4 Density Amino Acids throughout the day in4-5 doses to provide a constant feeding of quality amino acids. To take it a step further, I recommend an aggressive peri-workout glycogen and amino acid feeding protocol on your arm training days. Take 10-15 Muscularity BCAA capsules and sip Glutamine Select (2-3 scoops in water) during your workout. To top things off, drink a Muscle Provider/Mass Maker shake as soon as you get home from the gym. If you are following a reduced-carb diet, time you higher-carb days for the days you do your arm specialization program.
Primary Workout
- Incline Dumbbell Curl
Warm-up
6 sets of 6-10 - Wide-grip Barbell Drag Curl:
2-3 sets of 8-12 - Under-grip Chin
2 sets of max reps
“Feeder” Workout (2 days later):
- Seated Dumbbell Curl
Warm-up
1 set of 10-15 reps.
2 sets of 6-10/3-4/1-3 reps*
* in drop set style
The second workout not only provides a second hypertrophy-promoting stimulus but it also flushes the biceps with blood and nutrients increasing recuperation and growth. If you are following the amino-rich nutrition protocol above, you will be flooding your muscles with everything they need.
EXERCISES
If I had to choose just one biceps exercise, I would go with the extremely versatile Dumbbell Curl. The free movement of dumbbells allows for different elbow and hand positions, arcs of movement and ranges-of-motion to provide dozens of distinct variations.
The Incline Dumbbell Curl is a great size builder that places a lot of emphasis on the outer biceps. Set the bench at a 45° angle; focus on supinating the forearm (palms facing one another at the bottom, pinkie side of the dumbbell twisted inward towards your shoulder at the top) and slowly lowering the weight. Be cautious with your form on this exercise because, although it can pay big dividends in size, it also places stress on the shoulder and elbow joints.
Barbell Curls share a reputation with the two previous exercises as excellent strength and size builders. This exercise can be done with a straight or cambered bar and with various width grips. Become a technician on this exercise.
Unbalanced curls are a very effective method to shock your biceps into new growth. Charles Poliquin is a big advocate of the One-arm Barbell Curl. This exercise is done by grabbing an Olympic bar in the center and curling while balancing the bar. Ray Binkowski echoes Poliquin’s sentiments, “It is a great bicep exercise but also forces the lifter to work their core.” A regular 7-foot 45-pound Olympic bar is pretty hard to use at first so some may need to start with a short 5-foot bar (usually around 35-pounds). These can be done either standing or on a Scott Curl bench. Another unbalanced curl is the Kettlebell/Band Resistance Barbell Curl. This one was taught to me by powerlifting coach Louie Simmons and is used regularly by his team at Westside Barbell. Instead of loading a bar with traditional plates, he has them attach light kettlebells to the bar with bands (hanging about a foot below the bar). This makes for resistance that “squirms” as you try to curl it. Louie seemed to delight in the fact that I thought the bar with 25-pound kettlebells would be easy. It isn’t. Give this one a try.
The Imbalanced Dumbbell Curl is an exercise with an off-center load, either by loading an adjustable dumbbell with more weight on the pinkie side or gripping the handle so that the center of the handle is closer to that side. This creates more tension during the supination aspect of the curl.
The Preacher (or Scott) Curl supports the elbows, removing the ability to easily cheat or use body English to complete the reps. My preference is for benches with the rounded face, like the Body Masters unit, as they cause the elbow to raise as the while staying in contact with the bench, giving you a stronger contraction. Lower the weight slowly and never bounce at the bottom.
If your gym has a special Spider Bench (Nebula makes a great one) try the Spider Bench Curl, it braces the arms similar to the Preacher Curl but in a position closer to contraction. You can also duplicate the movement in the same manner that Steve Weingarten does. “I use the flat (90°) side of the preacher bench.” He finds great benefit from the Flat-faced Preacher Curl. “Using the pad at 45°, like most people do, causes the barbell to fall into you just after the halfway mark of the lift. There's no resistance from the halfway point up.”
The Dumbbell Concentration Curl works the lateral biceps head, since the weight is curled inward towards the midline of the body. It is a controlled, slow movement that makes a good “finishing” exercise.
A similar, but often under-utilized exercise is the Bent-over Barbell (Concentration) Curl. Done either standing or seated at the end of a bench, the weight should be curled up to the forehead and held for a pause in the contracted position. Because the elbows are raised to a position perpendicular to the spine (as in the Spider Bench Curl), you feel an exaggerated bicep contraction.
In contrast, the Barbell Drag Curl places the arm in an enhanced stretch position with your elbows behind the upper body, removing the front delt from the movement. Keeping the elbows back and the bar in contact with the body through the entirety of the exercise. James Dalton (multiple title winner in drug-tested and open contests) says, “Drag curls allow me to accentuate the negative (eccentric) part of the rep and really cut down on the exercise's momentum.”
Along with Incline Dumbbell Curls and Drag Curls, the Supine DB Curl also places the arm in a stretched position (at the shoulder joint). These are similar to the Incline Dumbbell Curl but are done lying on a flat bench. Because of the strain on the shoulder joint, use this occasionally for variety and go for feel over poundages.
As biceps exercises go, the Undergrip Chin provides a full range-of-motion with significant resistance throughout. Do it with a close grip and don’t be afraid to add weight once your strength allows. Undergrip Chins work well with a variety of intensification techniques: negative-only reps, drop-sets (removing added weight by squirming out of a dipping belt), static contraction pauses, forced reps and super-sets.
Cables allow us to direct the line of resistance in any direction we wish, making them particularly useful in biceps training. The standard is Standing Low Cable Curl but the Overhead Cable Curl (one or two-handed) allows for an excellent peak contraction effect. The Seated Cable Curl is a great finishing exercise. Sit on the floor in front of a low pulley. While resting your elbows on the inside of your knees, curl the weight either to your forehead or lower your head and take it near the base of your skull.
When doing the Zottman Curl, curl the dumbbell in front of the body emphasizing the supination by twisting your pinkie-side inward at the top and pronating on the way down.
Reverse Curls (curls performed with the palms facing downward) and Hammer Curls (curls performed with the palms facing one another) shift more of the workload to the brachialis and brachioradialis. Powerlifting champion Wade Johnson uses Hammer and Reverse Curls as assistance exercises in order to balance the biceps work he gets from all of the pulling and rowing he does in his bench press assistance and deadlift training.
Not many biceps machines have a good feel to them, but if your gym has one you like, Machine Curls are a great place) to do techniques like drop-sets or static contraction pauses. If your biceps doesn’t quite fit you, it may still work well for Reverse Curls or One-Arm Curls.
Well there you have it! If you’ve been involved in bodybuilding for any length of time, you have probably read dozens of biceps training articles. Hopefully this article takes you beyond copying someone’s biceps workout to being able to understand how to create one specifically tailored to your physique. Keep pumping!